Close X

FETURES

  • Design of KE press brake is based on S-R-B (synchronized bed reference) principle with Y - Y2 control.
  • Rigidly welded, stress relieved frame ensures minimum deflection even under maximum load.
  • Cylinders from high quality forged steel are precisely honed. Pistons are hard chromed for longer life.
  • Rigid and accurate guiding of pressing beam to achieve desired beam-tilt.
  • Full electronic synchronization with proportional valve technology assures constant monitoring and correction of beam parallelism through CNC system.
  • Stroke depth measurement through high precision linear glass scales up to 0.021 mm.
  • Precise press beam depth mechanism enables desired bending accuracy and repeatability even over longer use.
  • Off centre bending without any damage to guiding system.
  • Controller and backguage options available.
  • Safety regulations as per the industrial norms.

CNC CONTROLLER OPTIONS

  • Design of KE press brake is based on S-R-B (synchronized bed reference) principle with Y - Y2 control.
  • Rigidly welded, stress relieved frame ensures minimum deflection even under maximum load.
  • Cylinders from high quality forged steel are precisely honed. Pistons are hard chromed for longer life.
  • Rigid and accurate guiding of pressing beam to achieve desired beam-tilt.
  • Full electronic synchronization with proportional valve technology assures constant monitoring and correction of beam parallelism through CNC system.
  • Stroke depth measurement through high precision linear glass scales up to 0.021 mm.
  • Precise press beam depth mechanism enables desired bending accuracy and repeatability even over longer use.
  • Off centre bending without any damage to guiding system.
  • Controller and backguage options available.
  • Safety regulations as per the industrial norms.

OPTIONALS

  • N. C. Control for complete setting and operation's
  • Only NC. Back gauge
  • Electronic hand safety devive
  • Degree protector on table
  • Ball transfer unit on table
  • Extra long squaring arm
  • Foundation Bolts
  • Color Scream as Per Your STD.
  • Anti Deflection System
  • Hydraulic Tool Clamping
  • Hydraulic Sheet Follower System
  • Laser Based Bend Measuring System

DA-65W

DA-65W

DA-65W

DA-65WDA-65WDA-65W

© 2009 Kawa Press Systems Pvt. Ltd. All rights reserved.

group companies